FCH120 | Stromag

FCH 120 brake delivers a very high braking torque and is designed
to be mounted on the shaft of the low speed wind turbines. It can be
mounted on large disc diameters requiring a large clearance between
the linings and the disc.

This positive brake is fitted with :

  • pads locating stops which enable pads replacing without dismantling the half-calipers.
  • a device for hydraulic return of the pistons : it enables to push back the lining pads for an easy replacement
  • the ACR system: Automatic Control of the pads Return : It allows to keep a constant response time whatever the linings wear by means of a constant air gap between the lining pads and the disc.

Product Features

  • Braking by application of hydraulic pressure
  • Fluid : mineral or synthetic oil
  • Brake to operate with full or controlled torque
  • Hydraulic return of the pistons device
  • Automatic Control of the pads Return (ACR)
  • Detection of full lining wear
  • Organic or sintered lining pads
  • Protection class C3-H standard ISO12944-2
  • Operating conditions :
    • wind turbine operating : 30°C to +60°C
    • park position without production : -40°C to +60°C
  • Braking Force up to 500 kN (static)
  • Option : Protection class C5M-H standard ISO12944-2
Click on image below to download pdf. To order hard copies of literature click here.

Related Literature

  • Stromag Line Card

Product News

Contact Info

Stromag France - Industrial Caliper & Drum Brakes (SIME Brakes)
20, allée des Erables
95934 ROISSY C.D.G Cedex
Phone: +33 (0)1 49 90 32 20
Fax: +33 (0)1 48 63 23 33

Jernbanevej 9
5882 Vejstrup
Phone: +45 63 255 255
Fax: +45 62 281 058
Email: info@altra-renewables.com