Customer Service

Stromag
+49 (0) 2303 102 0

Stromag - SIME Brakes
+33 (0)1 49 90 32 20

info@stromag.com

FCH120 | Stromag

FCH 120 brake delivers a very high braking torque and is designed
to be mounted on the shaft of the low speed wind turbines. It can be
mounted on large disc diameters requiring a large clearance between
the linings and the disc.

This positive brake is fitted with :

  • pads locating stops which enable pads replacing without dismantling the half-calipers.
  • a device for hydraulic return of the pistons : it enables to push back the lining pads for an easy replacement
  • the ACR system: Automatic Control of the pads Return : It allows to keep a constant response time whatever the linings wear by means of a constant air gap between the lining pads and the disc.

Produkteigenschaften

  • Braking by application of hydraulic pressure
  • Fluid : mineral or synthetic oil
  • Brake to operate with full or controlled torque
  • Hydraulic return of the pistons device
  • Automatic Control of the pads Return (ACR)
  • Detection of full lining wear
  • Organic or sintered lining pads
  • Protection class C3-H standard ISO12944-2
  • Operating conditions :
    • wind turbine operating : 30°C to +60°C
    • park position without production : -40°C to +60°C
  • Braking Force up to 500 kN (static)
  • Option : Protection class C5M-H standard ISO12944-2
Auf das untenstehende Bild klicken, um PDF herunterzuladen. Literatur-Druckversion bestellen Hier klicken.

Literatur zum Thema

  • Stromag Line Card